Two Bartels Pump BP7 Tubing samples displayed flat on a white background, shown from front and back angles, with two blue paper clips for size comparison.
The Bartels Pump | BP7 – Tubing
  • Typ. Dynamic Range Flow Rate (Water): 0 - 14000 µl/min
  • Typ. Dynamic Range Pressure (Water): 0 - 500 mbar
  • Typ. Dynamic Range Flow Rate (Air): 0 - 35000 µl/min
  • Typ. Dynamic Range Pressure (Air): 0 - 140 mbar
  • Size: 30 x 15 x 3,8 mm
  • Weight: 2 g
  • Lifetime: 5000 h

Previous model: mp6 micropumps

*Product is in mass production
To operate this micropump, you'll need the appropriate control electronics. We offer the mp-Multiboard2 and a range of drivers for various application requirements.
57,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
Top down picture of all four drivers to connect to micropumps: mp-driver, mp-lowdriver, mp-Highdriver, mp-Highdriver
Pump Driver for Bartels Micropumps
Microelectronic for the micropump The Bartels Pump | BP7 - Tubing mp-Lowdriver mp-Highdriver mp-Highdriver4 mp-Driver
69,00 196,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Select options This product has multiple variants. The options may be chosen on the product page
The Tygon tubing with an inner diameter of 1.3 mm is the preferred tubing for the mp6 micropump and our other components.
mp-t ID1.3 – Tygon Tubing
  Packaging unit: 1 meter If longer units are required, please contact us via our contact form.  
10,50 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
Two Bartels Pump BP7 mounting samples displayed flat on a white background, shown from front and back angles, with two blue paper clips for size comparison.
The Bartels Pump | BP7 – Mounting
  • Typ. Dynamic Range Flow Rate (Water): 0 - 14000 µl/min
  • Typ. Dynamic Range Pressure (Water): 0 - 500 mbar
  • Typ. Dynamic Range Flow Rate (Air): 0 - 35000 µl/min
  • Typ. Dynamic Range Pressure (Air): 0 - 140 mbar
  • Size: 30 x 15 x 3,8 mm
  • Weight: 2 g
  • Lifetime: 5000 h
  *Product is in mass production
To operate this micropump, you'll need the appropriate control electronics. We offer the mp-Multiboard2 and a range of drivers for various application requirements.
57,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
Picture of a small rectangular damper with two fluidic connections. Dampens pulsation, this allows flow sensors to measure more accurately.
mp-damper Pulsation Damper
  • Damper designed to reduce fluid pulsations.
29,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
Top down picture of the valve. A valve with two barb connectors and two pins for electrical connection.
Active 2/2-Valve with Medium Separation by Takasago
  • 2-way valve
  • with media seperation
  • reaction time: 600ms
  • low pressures: <1bar
33,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
The mp-mf Mounting frame is a frame for mounting the mp6 micropump. This mp6 mount is quick and easy to install.
mp-mf Micropump Mounting Frame
  Our mounting frame to mount our micropumps  
7,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
silicone tubing1,0 mm ID
mp-s ID1.0 – Silicon Tubing

mp-s ID1.0 Silicon Tubing   Our transparent mp-s silicone tubing has an inner diameter of 1 mm and a wall thickness of 1 mm. This makes it a perfect fit for our mp6 micropump and also for all other microfluidic … Continued

7,50 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
The mp-Multiboard2 fitted with an ESP32 microcontroller, connection ports for sensors valves, drivers and pumps.
mp-Multiboard2 Evaluation Board
  Evaluation Board for the simultaneous control of up to six micropumps incl. micro-USB-cable connection cable with The Bartels Pump | BP7 - Tubing excluding driverchip!  
299,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
Two y shaped transparent hose connectors, used for 1,3mm tubing.
mp-y Hose Connector
  • mp-y Tubing Connectors.
  • material: PP.
  • packaging Unit: 2 pcs.
  • compatible with mp-t ID 1.3 Tygon or mp-s ID 1.0 silicone tubing.
10,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
The mp-cv is a passive check valve. It prevents the medium from flowing back when the micropump is switched off.
The smallest check valve on earth!
  Passive valve integrated into stainless steel casing.  
43,50 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
The mp-f filter protects the microfluidic system from unwanted particles and contaminants.
mp-filter Micro Filter
  Our filter component for protection of the microfluidic device against particles  
61,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
Image of all six pumps included in the kit, as well as the Multiboard2 and every pump driver we offer to properly control the pumps.
mp-basic Kit – The Starter Set
  • 6x The Bartels Pump | BP7 - Tubing
  • 1x mp-Multiboard2 Evaluation Board including cable harness for The Bartels Pump | BP7 - Tubing and Micro USB cable
  • 1x mp-Lowdriver Pump Driver
  • 1x mp-Highdriver Pump Driver
  • 1x mp-Driver Pump Driver
  • 1x mp-Highdriver4 Pump Driver
  • 1x 1m mp-t ID1.3 Tygon Tubing
  • 1x mp-hc Micro Hose Clamps Packaging Unit: 10 pieces
1.029,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
A mp-bt bubble trap to remove gas bubbles from their microfluidic system. A side and a top down view, showing the three fluidic connections of the part.
mp-bt Bubble Trap | Bartels Mikrotechnik
Our Bubble Trap to remove bubbles from water-based solutions.
49,50 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
The Accessories Bundle includes our most popular microfluidic accessories for a number of different applications. It includes both of our tubing options (Tygon and silicone) as well as hose clamps and y-connectors.
Microfluidic Accessories Kit
1x 1m mp-t ID1.3 Tygon Tubing 1x 1m mp-s ID1.0 Silicon Tubing 1x mp-hc Micro Hose Clamps Packaging Unit: 10 Pieces 1x mp-y Tubing Connectors Packaging Unit: 2 Pieces
50,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
slf3s 1300f sensor with side connectors and cable on white background
SLF3S Flow Sensors for liquids by Sensirion
  • SLF3S-0600F Flow Sensor - for Low Flow including: connection cable, tubing connector and mp-Damper Pulsation Damper
  • SLF3S-1300F Flow Sensor - for High Flow including: connection cable, tubing connector and mp-Damper Pulsation Damper
245,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Select options This product has multiple variants. The options may be chosen on the product page
The mp-hc is a very small hose clamp that firmly attaches the hose to the individual components, especially the mp6 micropump.
mp-hc Micro Hose Clamps
  Leakproof tube connection that fits perfectly on the tubing mp-t (1.3mm id; 3mm od) over our micropump barbs Packaging unit: 10 pieces  
22,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
Picture of a possible system built with the advance kit. Two pumps pumping different liquids through a microfluidic Chip, controlled with the mp-Multiboard2.
mp-advance Kit – The Allrounder
  • 6x The Bartels Pump | BP7 - Tubing
  • 1x mp-Multiboard2 Evaluation Board Including cable for the connection of The Bartels Pump | BP7 - Tubing and Micro USB cable
  • 1x mp-Lowdriver Pump Driver
  • 1x mp-Highdriver Pump Driver
  • 1x mp-Driver Pump Driver
  • 1x mp-Highdriver4 Pump Driver
  • 1x SLF3S-0600F Flow Sensor by Sensirion including cable and fluid connectors
  • 2x mp-damper Pulsation Damper
  • 1x Pressure Sensor
  • 1x mp-valvedriverT with 2 active Takasago valves including cable connection
  • 1x Straight Channel Chip 560 by microfluidic ChipShop
  • 1x Microfluidic Chip Connectors by Microfluidic ChipShop Packaging Unit: 10 pcs.
  • 1x 1 m mp-t ID 1.3 Tygon tubing
  • 1x mp-hc Micro Hose Clamps Packaging Unit: 10 pcs.
  • 1x Power Supply USB C
1.719,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
Microfluidic reservoir bundle, consisting of a glass vial, a septum screw cap, two needles and two tubing connectors.
Microfluidic Reservoir Kit
  includes:
  • 1x Reservoir with screw cap
  • 2x Needles
  • 2x Tubing Connector
 
54,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
Customizable microfluidic kit for the testing of our mp6 micropump
mp-select Kit – for customised solutions
  • 6x The Bartels Pump | BP7 - Tubing
  • 1x mp-Multiboard2 Evaluation Board including cable harness for The Bartels Pump | BP7 - Tubing and Micro USB cable
  • 1x 1m mp-t ID1.3 Tygon Tubing
  • 1x mp-hc Micro Hose Clamps Packaging Unit: 10 pieces
  • options: mp-Lowdriver Pump Driver mp-Driver Pump Driver mp-Highdriver Pump Driver mp-Highdriver4 Pump Driver
669,00 1.029,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Select options This product has multiple variants. The options may be chosen on the product page
A bag of the small blue connectors being poured out.
Microfluidic Chip Connectors by microfluidic ChipShop
  • mini luer connectors
  • mini luer to barb
  • for microfluidic ChipShop products
  • material: PP
  • packaging unit: 10 pcs.
 
25,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
Mounting Kit for The Bartels Pump | BP7, including a black mounting bracket, a clear plastic base, screws, washers, and nuts
Mounting Kit for The Bartels Pump | BP7
  • 3D Printed Microfluidic Chip (75 x 26 x 5 mm)
  • 3D Printed Mounting Frame
  • Fluidic Connectors
  • 4x O-Ring (1x0,4mm)
  • 4x M2 6mm Screw
  • 4x M2 Nut
112,50 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
NC valvebundle for microfluidic systems. Picture of two Takasago valves, our mp-valvedriverT driver electronic, power supply and connection cable to the mp-Multiboard2.
Active Valve Kit Takasago
  • 1x mp-valvedriverT
  • 2x Active Valve 2/2-Way with Media Seperation by Takasago
  • 1x Cable for the connection to the mp-Multiboard2
  • 1x power supply
207,00 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket
Top down view of a small white plastic valve with two fluidic connectors.
sm-cv Check Valve
  • passive check valve
  • Customizable opening pressure: 6mbar-1200mbar
  • Customizable fluid connectors
43,50 

excl. VAT

plus Shipping Costs

Delivery time: 1 - 3 working days

Add to basket