mp-basic Kit – The Starter Set


  • 6x The Bartels Pump | BP7 – Tubing
  • 1x mp-Multiboard2 Evaluation Board
    including cable harness for The Bartels Pump | BP7 – Tubing and Micro USB cable
  • 1x mp-Lowdriver Pump Driver
  • 1x mp-Highdriver Pump Driver
  • 1x mp-Driver Pump Driver
  • 1x mp-Highdriver4 Pump Driver
  • 1x 1m mp-t ID1.3 Tygon Tubing
  • 1x mp-hc Micro Hose Clamps
    Packaging Unit: 10 pieces

Delivery time: 1 - 3 working days

SKU: BM-S-0006 Category:


mp-basic Kit – The Starter Set

all for your microfluidic pump

Not sure yet if our microfluidic pump is right for you? Our mp-basic kit is ideal for testing our The Bartels Pump | BP7 – Tubing micropump for your application.

The mp-basic kit contains everything you need to test the microfluidic pump in an active system. In order to be able to test the pump for its suitability, we designed the mp-Multiboard2 so that it can operate with simple handling steps.

You can equip the mp-Multiboard2 with integrated ESP32 microcontroller with all our available drivers. This allows you to test from the lowest flow rate with one micropump up to six micropumps simultaneously. The available microfluidic driver chips are the mp-Driver, mp-Lowdriver, mp-Highdriver and mp-Highdriver4. You can use all drivers with the evaluation board and the software we developed. This allows for easy operation of the microfluidic pump.

In the software, you can set the frequency, as well as the voltage. In addition, there is an integrated timer mode, whereby the microfluidic pump is specifically switched on and off. Due to the simple plug-in connections and cables, a flexible use of the micropumps with the mp-Multiboard2 is given. The software for the mp-Multiboard2 is available in our download area.


Tubing and hose clamps complete the mp-basic set. The tubing fits perfectly to our microfluidic pump and the other components. So, if you want to extend your system, you can easily do so. Let us know which further components you need or directly assemble your own set. An overview of all available components of our partners can be found on our website – to sensors, valves or microfluidic chips.

Test our microfluidic pump with the mp-basic kit now!

You have not found what you are looking for or you still have open questions?
Then feel free to contact us directly via our contact form on our contact page. We will get back to you as soon as possible.

Technical Data

mp-basic evaluation-set containing:

*6 piezoelectric double diaphragm pump
Product in compliance with RoHs directive.

*1 mp-Multiboard2
evaluation board for Arduino
It runs all driverchips mp-Driver, mp-Lowdriver, mp-Highdriver, mp-Highdriver4

*1 mp-Lowdriver
Output for one micropump of the mp6-series

*1 mp-Driver
Output for one micropump of the mp6-series

*1 mp-Highdriver
Output for one micropump of the mp6-series

*1 mp-Highdriver4
pump driver for driving up to four micropumps simultaneously

*1m mp-t Tygon® Tubing for micropump

*1 Micro-USB Kabel

*1 Software and driver

*1 pu Micro Hose Clamp mp-hc
packaging unit: 10 pieces

Customs tariff code
mp-Multiboard2 85423990
mp-Highdriver 85423990
mp-Driver 85423990
mp-Lowdriver 85423990
mp-Highdriver4 85423990
mp6 84135040
mp-t 39173200
mp6-mol 85369010
mp-hc 39174000


You can find more technical data in the data sheet or in the download area on our homepage

Data sheets

Click to download relevant

Data Sheets for software,

Data Sheets for electronics,

Data Sheets for accessories and

Data Sheet for micropumps.


You are currently viewing a placeholder content from Youtube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information