The mp-Multiboard2 can control up to six micropumps. It supports up to three pump drivers in combination:

• mp-Driver (controls one micropump)
• mp-Lowdriver (controls one micropump) OR mp-Highdriver (controls one micropump)
• mp-Highdriver4 (controls up to four micropumps).

Since a micropump cannot be operated without a driver, the Multiboard2 must always be used together with a suitable driver module.

For serial or large-scale applications, we offer customized electronic solutions tailored to your specific requirements. Please contact us for more details.

Yes, The Bartels Pump | BP7 can be sterilized.

Common methods: Cleaning with solvents (e.g. Ethanol), autoclavation and E-beam and gamma radiation. For both methods the radiatons of 15, 25 and 40 kGy were experimented successfully. 

All wetted materials inside The Bartels Pump | BP7- Tubing and The Bartels Pump | BP7 - Mounting are PPSU.

The lowest flow rate is very dependent on the conditions in the customers test system.

Generally, a flow rate of about one digit or even less for liquids can be achieved.

No, due to the passive check valves The Bartels Pump | BP7 can only pump in one direction.

For bi-directional operation see the following pages:

• Micropump Manual
• Bi-directional Flow Control System
• Bi-directional Pressure Control System

Yes, it is possible to pump blood with The Bartels Pump | BP7.

To ensure optimal performance of Bartels FluidicStudio in use with mp-Multiboard2, we recommend the following system specifications:

• Operating System: Windows 10 or Windows 11 (64-bit)
• Processor: Intel Core i5 (7th generation or newer) or AMD Ryzen 3
• Memory: 8 GB RAM
• Graphics: Dedicated GPU with at least 2 GB VRAM (e.g., AMD Radeon R5 or NVIDIA GeForce GT series)