Shop

Delivery time: 1 - 3 working days

Image of all six pumps included in the kit, as well as the Multiboard2 and every pump driver we offer to properly control the pumps.

mp-basic Kit – The Starter Set

6x The Bartels Pump | BP7 - Tubing
1x mp-Multiboard2 Evaluation Board including cable harness for The Bartels Pump | BP7 - Tubing and Micro USB cable
1x mp-Lowdriver Pump Driver
1x mp-Highdriver Pump Driver
1x mp-Driver Pump Driver
1x mp-Highdriver4 Pump Driver
1x 1m mp-t ID1.3 Tygon Tubing
1x mp-hc Micro Hose Clamps Packaging Unit: 10 pieces

1.029,00 €

excl. VAT

Delivery time: 1 - 3 working days

mp-bt Bubble Trap

Our Bubble Trap to remove bubbles from water-based solutions.

49,50 €

excl. VAT

Delivery time: 1 - 3 working days

The mp-cv is a passive check valve. It prevents the medium from flowing back when the micropump is switched off.

mp-cv Check Valve

Passive valve integrated into stainless steel casing.

43,50 €

excl. VAT

Delivery time: 1 - 3 working days

Picture of a small rectangular damper with two fluidic connections. Dampens pulsation, this allows flow sensors to measure more accurately.

mp-damper Pulsation Damper

Damper designed to reduce fluid pulsations.

29,00 €

excl. VAT

Delivery time: 1 - 3 working days

The mp-f filter protects the microfluidic system from unwanted particles and contaminants.

mp-filter Micro Filter

Our filter component for protection of the microfluidic device against particles

61,00 €

excl. VAT

Delivery time: 1 - 3 working days

The mp-hc is a very small hose clamp that firmly attaches the hose to the individual components, especially the mp6 micropump.

mp-hc Micro Hose Clamps

Leakproof tube connection that fits perfectly on the tubing mp-t (1.3mm id; 3mm od) over our micropump barbs Packaging unit: 10 pieces

22,00 €

excl. VAT

Delivery time: 1 - 3 working days

The mp-labtronix control unit next to six The Bartels Pump | BP7 included in the kit.

mp-Lab! Kit – Micropump control for your laboratory

6x The Bartels Pump | BP7 - Tubing
1x mp-Labtronix controller for micropump including driver software, power supply, USB cable and manual
1x The Bartels Pump | BP7 - Tubing-con connection cable from micropump to mp-Labtronix
1x 1m mp-t ID1.3 Tygon Tubing
mp-hc Micro Hose Clamp Packaging Unit: 10 pieces

1.440,00 €

excl. VAT

Delivery time: 4 - 5 weeks

Close up of the user interface of the control unit, showing a screen with levers.

mp-Labtronix Control Unit for Micropumps

microcontroller-driven electronics: waveform, frequency and amplitude can be changed separately, connectors for one micropump of the mp6-series, usb interface and driver software scope of supply: - mp-Labtrnoix Control Unit for Micropumps - including mp6-con Connection cable from the mp6-series to mp-Labtronix - USB Cable - power supply

1.132,00 €

excl. VAT

Delivery time: 4 - 5 weeks

The mp-mf Mounting frame is a frame for mounting the mp6 micropump. This mp6 mount is quick and easy to install.

mp-mf Micropump Mounting Frame

Our mounting frame to mount our micropumps

7,00 €

excl. VAT

Delivery time: 1 - 3 working days

The mp-Multiboard2 fitted with an ESP32 microcontroller, connection ports for sensors valves, drivers and pumps.

mp-Multiboard2 Evaluation Board

Evaluation Board for the simultaneous control of up to six micropumps incl. micro-USB-cable connection cable with The Bartels Pump | BP7 - Tubing excluding driverchip!

299,00 €

excl. VAT

Delivery time: 1 - 3 working days

mp-s ID1.0 – Silicon Tubing

mp-s ID1.0 Silicon Tubing Our transparent mp-s silicone tubing has an inner diameter of 1 mm and a wall thickness of 1 mm. This makes it a perfect fit for our mp6 micropump and also for all other microfluidic … Continued

7,50 €

excl. VAT

Delivery time: 1 - 3 working days

Customizable microfluidic kit for the testing of our mp6 micropump

mp-select Kit – for customised solutions

6x The Bartels Pump | BP7 - Tubing
1x mp-Multiboard2 Evaluation Board including cable harness for The Bartels Pump | BP7 - Tubing and Micro USB cable
1x 1m mp-t ID1.3 Tygon Tubing
1x mp-hc Micro Hose Clamps Packaging Unit: 10 pieces
options: mp-Lowdriver Pump Driver mp-Driver Pump Driver mp-Highdriver Pump Driver mp-Highdriver4 Pump Driver

669,00 € – 1.029,00 €

excl. VAT

Delivery time: 1 - 3 working days

Select options

The Tygon tubing with an inner diameter of 1.3 mm is the preferred tubing for the mp6 micropump and our other components.

mp-t ID1.3 – Tygon Tubing

Packaging unit: 1 meter If longer units are required, please contact us via our contact form.

10,50 €

excl. VAT

Delivery time: 1 - 3 working days

A picture of a driver electronic used for Bürkert valves with the included cable that can connect two valves.

mp-valvedriverB for Bürkert Valves

control up to two Bürkert valves
For use with the Multiboard2
simple plug and play installation

103,00 €

excl. VAT

Delivery time: 1 - 3 working days

A picture of a driver electronic used for Festo valves with the included cable that can connect two valves.

mp-valvedriverF for Festo Valves

control up to two Festo valves
For use with the Multiboard2
simple plug and play installation

103,00 €

excl. VAT

Delivery time: 1 - 3 working days

A picture of a driver electronic used for memetis valves with the included cable that can connect two valves.

mp-valvedriverM for Memetis Valves

control up to two memetis valves
For use with the Multiboard2
simple plug and play installation

103,00 €

excl. VAT

Delivery time: 1 - 3 working days

A picture of a driver electronic used for Takasago valves with the included cable that can connect two valves.

mp-valvedriverT for Takasago Valves

control up to two Takasago valves
For use with the Multiboard2
simple plug and play installation

103,00 €

excl. VAT

Delivery time: 1 - 3 working days

Two y shaped transparent hose connectors, used for 1,3mm tubing.

mp-y Hose Connector

mp-y Tubing Connectors.
material: PP.
packaging Unit: 2 pcs.
compatible with mp-t ID 1.3 Tygon or mp-s ID 1.0 silicone tubing.

10,00 €

excl. VAT

Delivery time: 1 - 3 working days

Two mp6 samples displayed flat on a white background, shown from front and back angles, with two blue paper clips for size comparison.

mp6 micropumps – piezoelectric double diaphragm pumps

Typ. Dynamic Range Flow Rate (Water): 0 - 6000 µl/min
Typ. Dynamic Range Pressure (Water): 0 - 500 mbar
Typ. Dynamic Range Flow Rate (Air): 0 - 20 000 µl/min
Typ. Dynamic Range Pressure (Air): 0 - 150 mbar
Size: 30 x 15 x 3,8 mm
Weight: 2 g
Lifetime: 5000 h

Last Time Buy Date : 12/31/2024 Date of Discontinuation : 03/31/2025 Direct Successor Model: The Bartels Pump | BP7 - Tubing

*Not Recommended for New Design

54,00 €

excl. VAT

Delivery time: 1 - 3 working days

Select options

Pressure Sensor

Pressure Sensor for the mp-Multiboard2

rated pressure range: 0-1 bar, 0-15 psi
dimensions: 8 mm x 7 mm
update frequency: 1 kHz analog / 2kHz digital

124,00 €

excl. VAT

Delivery time: 1 - 3 working days

Top down picture of all four drivers: mp-driver, mp-lowdriver, mp-Highdriver, mp-Highdriver

Pump Driver for Bartels Micropumps

Microelectronic for the micropump The Bartels Pump | BP7 - Tubing mp-Lowdriver mp-Highdriver mp-Highdriver4 mp-Driver

69,00 € – 196,00 €

excl. VAT

Delivery time: 1 - 3 working days

Select options

R&D Kit

- Kick off with our engineer to set up the application boundaries.

- Our engineer selects components specifically for your application, such as pumps, sensor(s), associated driver(s), multiboard2, tubing, and connectors.

- Our engineer builds your setup on our side and tests your application with air/water.

- You receive your customized set of components with a detailed report for easy setup on your end. The report includes recommended parameters.

- Once the customized setup is at your location, and you have conducted your initial experiments, you have the possibility for a direct connection to our experts to support you with any further questions.

4.635,00 €

excl. VAT

Delivery time: 1 - 3 working days